TES 2900 True RMS Multimeter

TES 2900 True RMS Multimeter

Features:

10,000 Count True RMS reading
Variable Frequency drive (VFD) V & Hz measurement.
Lo-Z voltage measurement to drain ghost voltages.
Check 3 phase rotation measurement
Voltage harmonic ratio measurement.
Smart ohm for ground resistance measurement.
Data hold & Auto hold mode.
Max/Min/Avg record mode.
Relative value display.
Frequency count. (Auto-Range)
Temperature type K, J measurement.
Capacitance check (10nF-10,000uF)
Data memory & read function.

• Unit: 193mm (L) x 91mm (W) x 53mm (H), (7.6”L x 3.6”W x 2.1”H)
• Box: 176mm (L) x 252mm (W) x 83mm (H), (6.925”L x 9.925”W x 3.275”H)

TES 2900 True RMS Multimeter

• Maximum Voltage Between Any Terminal and Earth Ground: 1000V
• Fuse Protection for mA uA Input: 440mA, 1000V FAST Fuse
• Fuse Protection for 10A Input: 11A, 1000V FAST Fuse
• Display: * Digital:9999 counts, updates 1/sec * Bar Graph: 40 segments, updates 5/sec
• Battery Type: Single standard 9-Volt battery, NEDA 1604, JIS 006P, IEC 6F22.
• Operating Temperature and Humidity: 0°C to 50°C, below 80% R.H.
• Storage Temperature and Humidity: -10°C to 60°C, below 70% R.H.
• Altitude: 2000m
• Temperature Coefficient: 0.1x (specified accuracy)/°C(<18°C or >28°C)
• Measurement Category: 1000V Measurement Category III and 600V, Measurement Category IV Pollution Degree 2
• Accessories: Manual
• Maintenance & Cleaning:
1. Repairs or servicing not covered in this manual should only be performed by qualified personal.
2. Periodically wipe the case with a dry cloth and detergent. Do not use abrasives or solvents on this meter